For Use With: Clean, dirty, coating or crystallizing liquids in above grade metal or below grade tanks of any material
Primary Application: Small bulk storage
Note: Probes are offered in standard or custom lengths. Standard length for the cable probe is 216”. Custom lengths may be specified in 1/2” (1.3cm) increments down to 48” (1.2m) on the cable probe. A cut charge of $200 net will be added to the next highest standard probe length on custom probe length orders. Standard probe lengths may also be user cut in the field which is addressed in the manual.
This general purpose guided wave transmitter provides continuous level measurement up to 18’ (5.5m) with a 4-20 mA signal output, and is configured via free WebCal® software. Standard probe lengths may be user cut in the field. Rugged 316L stainless steel probe and process mount. Self diagnostics with five selectable fail-safe signal outputs.
Probes may be installed in above grade metal and reinforced concrete tanks or below grade tanks of any material.
Custom lengths may be specified in 1/2” (1.3cm) increments down to 48” (1.2m). A cut charge of $100 net will be added on custom probe length orders. Standard probe length may also be user cut in the field which is addressed in the manual.
Range: 18' (5.5m)
Accuracy: ± 3mm
Dead band: Top: 4" (10cm), bottom: 2" (5cm)
Repeatability: <2mm
Resolution: <2mm
Configuration: WebCal™ PC, Windows®, USB 2.0
Supply voltage: 10-30 VDC
Max. consumption: <50mA @ 24 VDC
Signal output: 4-20mA, 3-wire
Signal fail-safe: 4mA, 20mA, 21mA, 22mA or hold last
Dielectric: >1.8
Process temp.: F: -40° to 302°, C: -40° to 150°
Ambient temp.: F: -40° to 185°, C: -40° to 85°
Pressure: -14.5 to 250 psi, (-1 to 17 bar)
Enclosure rating: NEMA 4
Encl. material: Aluminum
Feed through mat.: 316L SS & PEEK
Conduit entrance: (1) 1/2" NPT connector
Probe material: 316 SS
Process mount: 3/4" NPT (3/4" G)
Classification: General purpose
Certification: cCSAus, NRTL
Compliance: CE, CRN, RoHS
Shipping
Promag Enviro provides free shipping throughout Canada and the U.S.
See Terms and Conditions.