Seametrics Hot Tap Insertion Paddlewheel Meter IP150B (IP150B)

Your Price :

$1,416.00

Request for Quote

Specifications

Type: Sensor Only
Material: Brass with PVDF (Kynar®) rotor
Usage: for 3"-12" pipes
Power: Standard power pickup
Connector: without pump/control connector
Isolation Valve: Bronze valve assembly
Rotor Shaft: Nickel-bonded tungsten carbide rotor shaft
Series: IP100 Series
Environmental: Not immersible
Regulatory: CE
Not Included: The sensors need to be mated with a fitting such as the Seametrics saddle fitting, to match whatever your application requires.
Weight: 13 lbs
Features:
- Hot tap: Insert or remove without depressurizing pipe
- High quality ruby bearings and carbide or ceramic rotor shaft ensure long life and excellent low-flow performance
- Only one moving part that's easily replaced
- Paddlewheel machined from solid rod for maximum low-flow performance
- No magnetic drag on the paddlewheel rotor as it uses a Hall-effect sensor
- Adjustable depth insertion design allows the unit to be installed in a variety of pipes of different sizes
- PVDF rotor
- Choice of materials for compatibility with variety of chemicals
Applications:
- Clean water
- Aquariums, water parks
- Control of chemical metering pumps
- Connection to PLCs
- Water and wastewater monitoring

Other Hot Tap Adjustable Depth Insertion Paddlewheel Meters are on our Seametrics Hot Tap Adjustable Depth Insertion Paddlewheel Meter IP150/IP250 page.

Top Models
Product Details
Downloads
Videos
FAQ

General Description

The IP150/250 series meters have the sensor mounted on a rod that slides in and out of an adapter/isolation valve assembly that mounts on the pipe. Thus, it is adjustable to a range of pipe sizes and the sensor can be removed while keeping the pipe pressurized. It's also possible, with the right tools, to install the unit while the pipe is pressurized. They come in 2 different size ranges, indicated by the first 4 characters of the model number:

IP15 for 3-12" pipe
IP25 for 12"-40" pipe (or larger with the "-72" option, see below)

The next digit of the model number indicates what (if any) electronic module is mounted on the unit:

IPxx0: Sensor only, with current-sinking pulse output for wiring to external device, e.g., wall- or panel-mounted electronic module
IPxx3: With FT430 Flowmeter Transmitter display module, with pulse output
IPxx6: With DL76 Data Logger module (for connection to a laptop computer to download data - requires DC3-USB cable)
IPxx7: With FT450 Flowmeter Transmitter display module, battery-powered
IPxx9: With FT440 Flowmeter Transmitter display module, with pulse and analog output

The following character indicates what material the sensor body, shaft and adapter fitting are made from:

IPxxxB: Brass
IPxxxP: PVC
IPxxxS: 316 Stainless Steel

Other options available:

Rotor Shaft Material ("-01" or "-68"): The standard rotor shaft is made of nickel-bonded tungsten carbide, a very hard material with good chemical resistance. For certain applications a zirconia ceramic or silicon carbide shaft may be a better choice.
Micropower Pickup ("-04"): You can specify a lower power pickup (for an external battery-powered FT450).
Connector Type ("-06", "-07" or "-106"): If you are connecting it directly to an LMI metering pump, you can specify either the 4-pin or 5-pin connector. Also, you can specify a Seametrics connector (for an external PD10).
Valve Type ("-08" or "-09"): You can optionally get a stainless steel isolation valve (if you've selected a stainless steel sensor), or the valve can be omitted (you supply your own).
Immersible ("-40"): This provides protection for the sensor in case the installation location is submerged. Immersible to maximum of 3 ft (1m), up to 2 weeks.
Insertion Extension ("-72"): The standard IP25 meters can fit 12"-40" pipe. With this option, they will fit 36"-64" pipes.