The iMAG-Series is the most economical flanged electromagnetic flowmeter on the market. With electrodes designed to discourage fouling, it is available in 2” to 12” pipe for municipal or industrial water, waste and reclaimed water, pump stations, and packaged plant applications. Minimal straight pipe requirements allow iMAG-Series meters to be used in piping configurations where there is little space between the meter and an elbow.
iMAG-Series meters are CE certified, certified to NSF/ANSI standard 61, and are rated IP68 for applications where the meter may be operated under water to a depth of at most 10 feet (3 meters) continuously.
The display is meter mounted and both rate and total indication are standard. Rate and total units and pulse scaling can be set via the front panel touch keypad by the user. Bidirectional flow reading is standard with totals available in forward, reverse, net flow, batch forward flow, and batch reverse flow. Batch totals can be reset. Built-in data logging is available as an option for secure flow logging.
The iMAG 4700 is available in either DC or battery powered versions. A power/output cable allows outputs for use with a variety of Seametrics and other displays and controls for remote reading and telemetry applications. Pulse output is standard on all models. In addition, 4-20mA loop or Modbus® protocol outputs are optional, although battery life will be reduced if Modbus® is ordered on battery powered units.
Shipping
Promag Enviro provides free shipping throughout Canada and the U.S.
See Terms and Conditions.
Why are the DC-powered meters offered in both 50Hz and 60Hz versions?
The frequencies shown for DC-powered units refer to onboard noise-filtering. For example, when used in a country where the power grid operates at 50Hz, it is best to select a DC-powered iMAG4700 that ignores or reduces signal noise at that frequency – in other words, it's best to choose D2. For most North American customers, it's best to choose D1.