Liter indication also available; please inquire.
This meter is suitable for the following applications:
The meters are typically mounted in a 2" saddle fitting, which is ordered separately, to match the pipe that you are installing it in.
Also available is the non-hot-tap model, the IP110/IP210 series.
Low-Flow Single-Jet Nickel Plated Brass Flowmeter
Low-Flow Single-Jet 316 Stainless Steel Flowmeter
Low-Flow Single-Jet PTFE Teflon Flowmeter
Low-Flow Single-Jet Polypropylene Flowmeter
Blue-White's FVS Series flow meters are used for low flow applications. These meters will work with chemical metering pumps and will work with pulsating flows that are notoriously difficult to measure. The working range of flows that can be measured is from 30 mL/min to 7000 mL/min depending on the model chosen. There are options to provide for compatibility with a variety of chemicals using a mixture of PVC, PVDF, FKM and EPDM. Rate and total displays are also optional and are surprisingly inexpensive.
This Carlon water meter is used to measure the amount of make-up water added to a system. The water meter can be fitted with a dial readout or a contact head. The contact head will give a dry contact closure every predetermined number of gallons to signal a remote counter or timer. The timer can, in turn, be used to run a pump, solenoid, or other device. The make-up water can be treated based on volume through the water meter. The timer can be part of a remote pump control panel or is available as a water meter/timer package. The timer in the water meter/timer package is an Omron timer and is infinitely adjustable from seconds to hours.
8042 Winston St.
Toll Free: 1-866-449-2781