• Sizes: 3/16" - 1/2"
• Material: 316L stainless steel
• Applications:
  • Laboratory scale mixing
  • Pilot plants
  • Epoxy blending
  • Gas blending

• In sizes 1/4"- 2"
• Material: 304L or 316L stainless steel
• Pipe: Sch 40
• Applications: Polymer dilution
• Applications: Water treatment
• Applications: Chemical blending
• Applications: Oil blending

• Sizes: 3/8" - 2"
• Material: Clear PVC
• Pipe: Sch 40
• Applications: Admixing of water treatment chemicals
• Applications: pH control
• Applications: Chlorination and ozonation
• Applications: Process control sampling

• Sizes: 1/2" - 2"
• Material: Grey PVC
• Pipe: Sch 80
• Applications: Polymer blending
• Applications: Water treatment
• Applications: Chemical blending
• Applications: pH control
• Applications: Liquid/Gas blending

The 100 series mixers from Nordson EFD are a rugged and reliable option for inline chemical mixing. The interior elements are constructed from 316 stainless steel while the housing is from 304 stainless steel.

The series is modular, and most diameters are available in two lengths with either six or twelve elements. Two modules can be coupled together using a pipe connector.

• Elements: 316 Stainless steel
• Housing: 304 stainless steel pipe
• Max Pressure: 2500 – 8750 PSI

Walchem Propellor Mixers for chemical feed tanks, 1/15 HP 1550 RPM

Specifications

• Size: 4" or 9" prop
• Motor: Variety of motors available
• Dimensions: 30" shaft

Standard shaft length is 30". This agitator is recommended when ordering with an A&F tank and the shaft is made to fit the tank depth.

Specifications

• Size: 4" or 9" prop
• Motor: Variety of motors available
• Dimensions: 30" shaft
• Not Included: Clamp bracket

Agitators may be used for mixing of liquids to ensure a homogenous fluid during storage or to encourage chemical reactions such as blending of polymers with wastewater.

Specifications

• Size: 2" prop
• Motor: 1/3 HP TEFC 1725 RPM motor
• Electrical: 120 VAC 1 Ph
• Dimensions: 30" shaft
• Connection: 2" NPT
• Item Weight: 29 lbs

Specifications

• Size: 9" prop
• Motor: 1/3 HP TEFC 276 RPM gear motor
• Electrical: 120 VAC 1 Ph
• Dimensions: 38" shaft
• Item Weight: 40 lbs

Specifications

• Size: Two to six station
• Electrical: 120 or 220 VAC
• Includes: 1000 ml beakers

A jar mixer is a piece of test equipment that is used to evaluate on a small scale, in a lab simulation, what is going on in a full scale system. Two or more water samples from a test system can be agitated simultaneously and injected with different amounts of a test chemical, the results analyzed, and a calculation made as to what is needed to attain the desired results on the full scale of the system being tested.

Specifications

• For Use With: Stenner tanks only