• Diaphragm Pump
• Max output varies: 0.6 - 6.3 GPH
• Max pressure varies: 30 - 150 PSI

Walchem's EZ pumps possess the following features:

• High chemical resistance
• Low power consumption (20-22 watts)
• Manual operation (on/off/speed control)
• Optional timer control
• Solenoid drive
• 1 - 360 strokes/min. (settable)

These pumps are more precise than their tube/peristaltic pump counterparts and have better repeatability as well. The diaphragms are Teflon® faced and are therefore compatible with many chemicals.

• Diaphragm Pump
• Max Output: 0.2 GPH - 6.7 GPH (varies with model)
• Max Pressure: 30 - 290 PSI (varies with model)

Walchem's EWN-R pumps come equipped with the following features:

• Manual on/off or external digital/analog control
• Stop/Pre-Stop Input
• 1800:1 turndown ratio
• 1 - 360 Strokes/min.
• Stroke length and speed adjustment
• Solenoid Drive
• See brochure for wetted materials selection and further information

The EWN-R pumps are the most economical pump to receive either a digital or analog input for external control via flow meter, level transmitter, PLC or other device. They will also accept a stop or pre-stop input for remote control via switch. There is a wide variety of fluid outputs and pressure handling options as well as wetted materials to suit any application. The digital display gives accurate control, while the stroke length knob can be used for quick, coarse adjustments.

Walchem's EWN-Y pumps come equipped with the following features:

• Max Output: 0.4 GPH - 6.7 GPH (varies with model)
• Max Pressure: 30 - 250 PSI (varies with model)
• Manual on/off or external digital/analog control
• Stop/Pre-Stop Input
• Analog output
• Optional flow verification/calibration with EFS Sensor
• 1800:1 turndown ratio
• 1 - 360 Strokes/min.
• Stroke length and speed adjustment
• Solenoid Drive
• See brochure for wetted materials selection and further information

The EWN-Y pumps are the perfect pump when you need accurate control, analog output, or flow verification and calibrated output. The "Y" module allows you to receive either a digital or analog input for external control via flow meter, level transmitter, PLC or other device like the "R" module, but adds the above functions along with the stop or pre-stop input for remote control via switch, and also adds batch capabilities. There is a wide variety of fluid outputs and pressure handling options as well as wetted materials to suit any application. The easy to use digital display gives accurate control, while the stroke length knob can be used for quick, coarse adjustments.

Specifications

• Series: EHE
• Max Flow: 5.5 - 20 GPH
• Max Pressure: 30 - 150 PSI
• Electrical: 115 or 230 VAC, 50/60 Hz
• Pump Head: GFRPP, PVC or PVDF
• Valve Ball: CE or PTFE
• Valve Seat: FKM, EPDM or PCTFE
• O-Ring: FKM, EPDM or PTFE
• Diaphragm: PTFE (+ EPDM Backer)
• Gasket: PTFE
• Control: Digital Speed Control, Manual Stroke Adjustment, External Pulse & Analog Input
• Average Power: 48 Watts
• Weight: 23 lbs

• Diaphragm Pump
• Max Output: 0.6 GPH - 6.7 GPH
• Max Pressure: 30 - 150 PSI

Waterproof Walchem Diaphragm Chemical Feed Pump with manual or external digital control and available with maximum outputs from 5.5 to 20 GPH and maximum pressures of 30 to 150 PSI.

• Diaphragm Pump
• Maximum Output: 96 GPD
• Maximum Pressure: 73 PSI

Walchem Diaphragm Chemical Feed Pump for high viscosity fluids, with manual or external control, 4.0 GPH maximum flow.

• Diaphragm Pump
• Maximum Series Output: 39.6 GPH
• Maximum Series Pressure: 145 PSI

Walchem Motor-Driven Diaphragm Chemical Feed Pump, maximum output 39.6 GPH, up to 145 PSI.

• Diaphragm Pump
• Maximum Output: 114.3 GPH
• Maximum Pressure: 225 PSI

Walchem Motor-Driven Diaphragm Chemical Feed Pump, maximum output 114 GPH, up to 225 PSI.

Specifications

• Maximum Flow Rate: 2.1 GPM (8.0 LPM)
• Pipe Connection: 1/4" NPT
• Pump Body Material: PVDF (Kynar®)
• Diaphragm Material: PTFE (Teflon®)
• Air Motor Material: Ryton
• Maximum Operating Pressure: 100 PSI (0.7 MPa)
• Supply Air Pressure Range: 30 to 100 PSI (0.2 - 0.7 MPa)
• Maximum Air Consumption: 8.83 SCFM (250 L/min)
• Liquid Discharge Volume per Cycle: 0.5 oz (15 ml)
• Spool Valve Type: Looped C® Spring Air Spool
• CE Certified: Yes
• ATEX Certified: Yes
• Weight: 4.4 lbs
• Alternate Number: 1B00003MN

Specifications

• Maximum Flow Rate: 3.0 GPM (11.5 LPM)
• Pipe Connection: 1/4" NPT or 3/4" sanitary clamp fitting
• Pump Body Material: Aluminum, Stainless Steel, PPG, POM, Pure Poly or PVDF
• Diaphragm Material: PTFE (Teflon®)
• Air Motor Material: Ryton
• Maximum Operating Pressure: 100 PSI (0.7 MPa)
• Supply Air Pressure Range: 30 to 100 PSI (0.2 - 0.7 MPa)
• Maximum Air Consumption: 8.83 SCFM (250 L/min)
• Liquid Discharge Volume per Cycle: 0.7 oz (20 ml)
• Spool Valve Type: Looped C® Spring Air Spool
• CE Certified: Yes

Specifications

• Maximum Flow Rate: 4.8 GPM (18 LPM)
• Pipe Connection: 3/8" NPT
• Pump Body Material: PPG or Pure Poly
• Diaphragm Material: CR (Neoprene™), EPDM (Nordel™), NBR (Buna), PTFE (Teflon®), TPEE (Hytrel™) or TPO (Santoprene®)
• Air Motor Material: Aluminum
• Maximum Operating Pressure: 100 PSI (0.7 MPa)
• Supply Air Pressure Range: 30 to 100 PSI (0.2 - 0.7 MPa)
• Maximum Air Consumption: 8.83 SCFM (250 L/min)
• Liquid Discharge Volume per Cycle: 1.7 oz (50 ml)
• Spool Valve Type: Spring-Less Air Spool
• CE Certified: Yes
• Weight: 7.7 lbs

Specifications

• Maximum Flow Rate: 6.1 GPM (23 LPM)
• Pipe Connection: 3/8" NPT or 3/4" Sanitary Clamp Fitting
• Pump Body Material: Aluminum or Stainless Steel
• Diaphragm Material: CR (Neoprene™), EPDM (Nordel™), NBR (Buna), PTFE (Teflon®), TPEE (Hytrel™) or TPO (Santoprene®)
• Air Motor Material: Aluminum
• Maximum Operating Pressure: 100 PSI (0.7 MPa)
• Supply Air Pressure Range: 30 to 100 PSI (0.2 - 0.7 MPa)
• Maximum Air Consumption: 10.6 SCFM (300 LPM)
• Liquid Discharge Volume per Cycle: 1.7 oz (50 ml)
• Spool Valve Type: Spring-Less Air Spool
• CE Certified: Yes
• ATEX Certified: Yes

Specifications

• Maximum Flow Rate: 6.3 GPM (24 LPM)
• Pipe Connection: 3/8" NPT
• Pump Body Material: Glass Fiber Reinforced Polypropylene (PPG)
• Diaphragm Material: CR (Neoprene™), EPDM (Nordel™), NBR (Buna), PTFE (Teflon®), TPEE (Hytrel™) or TPO (Santoprene®)
• Air Motor Material: Ryton
• Maximum Operating Pressure: 100 PSI (0.7 MPa)
• Supply Air Pressure Range: 30 to 100 PSI (0.2 - 0.7 MPa)
• Maximum Air Consumption: 14.1 SCFM (400 L/min)
• Liquid Discharge Volume per Cycle: 2.4 oz (70 ml)
• Spool Valve Type: C-Spring Air Spool
• CE Certified: Yes
• Weight: 7.7 lbs

Specifications

• Maximum Flow Rate: 7.4 GPM (28 LPM)
• Pipe Connection: 1/2" NPT
• Pump Body Material: PPG or POM
• Diaphragm Material: CR (Neoprene™), EPDM (Nordel™), NBR (Buna), PTFE (Teflon®), TPEE (Hytrel™) or TPO (Santoprene®)
• Air Motor Material: Aluminum
• Maximum Operating Pressure: 100 PSI (0.7 MPa)
• Supply Air Pressure Range: 30 to 100 PSI (0.2 - 0.7 MPa)
• Maximum Air Consumption: 10.6 SCFM (300 L/min)
• Liquid Discharge Volume per Cycle: 1.7 oz (50 ml)
• Spool Valve Type: Spring-Less Air Spool
• CE Certified: Yes
• Weight: 13.2 lbs

Specifications

• Maximum Flow Rate: 13.2 GPM or 14.3 GPM
• Pipe Connection: 1/2" NPT
• Pump Body Material: Aluminum, Stainless Steel, PPG, POM or PVDF
• Diaphragm Material: CR (Neoprene™), EPDM (Nordel™), NBR (Buna), PTFE (Teflon®), TPEE (Hytrel™) or TPO (Santoprene®)
• Air Motor Material: Ryton
• Maximum Operating Pressure: 100 PSI (0.7 MPa)
• Supply Air Pressure Range: 30 to 100 PSI (0.2 - 0.7 MPa)
• Maximum Air Consumption: 14.1 SCFM or 15.9 SCFM
• Liquid Discharge Volume per Cycle: 2.4 oz (70 ml)
• Spool Valve Type: C-Spring Air Spool
• CE Certified: Yes

Specifications

• Maximum Flow Rate: 14.8 GPM or 15.8 GPM
• Pipe Connection: 1/2" NPT or 1" sanitary clamp fitting
• Pump Body Material: Aluminum, Stainless Steel, Conductive Polypropylene, POM, Pure Poly or PVDF
• Diaphragm Material: CR (Neoprene™), EPDM (Nordel™), NBR (Buna), PTFE (Teflon®), TPEE (Hytrel™) or TPO (Santoprene®)
• Air Motor Material: Polypropylene
• Maximum Operating Pressure: 100 PSI (0.7 MPa)
• Supply Air Pressure Range: 30 to 100 PSI (0.2 - 0.7 MPa)
• Maximum Air Consumption: 31.8 SCFM (900 L/min)
• Liquid Discharge Volume per Cycle: 2.9 oz (85 ml)
• Spool Valve Type: Looped C® Spring Air Spool
• CE Certified: Yes

Specifications

• Maximum Flow Rate: 26.4, 27.7 or 31.7 GPM
• Pipe Connection: 3/4" NPT or 3/4" ANSI flange
• Pump Body Material: GFR Polypropylene, PVDF, Aluminum or Stainless Steel
• Diaphragm Material: CR (Neoprene™), EPDM (Nordel™), FKM (Viton®), NBR (Buna), PTFE (Teflon®), TPEE (Hytrel™) or TPO (Santoprene®)
• Air Motor Material: Polypropylene or Aluminum
• Maximum Operating Pressure: 100 PSI (0.7 MPa)
• Supply Air Pressure Range: 30 to 100 PSI (0.2 - 0.7 MPa)
• Maximum Air Consumption: 38.9, 42.4, 45.9 or 49.4 SCFM
• Liquid Discharge Volume per Cycle: 8, 12, 22 or 27 oz
• Spool Valve Type: Looped C® Spring Air Spool
• CE Certified: Yes

Specifications

• Maximum Flow Rate: 43.6 GPM (165 LPM)
• Pipe Connection: 1" NPT or 1" ANSI flange
• Pump Body Material: Conductive Polypropylene, PPG or PVDF
• Diaphragm Material: CR (Neoprene™), EPDM (Nordel™), FKM (Viton®), NBR (Buna), PTFE (Teflon®), TPEE (Hytrel™) or TPO (Santoprene®)
• Air Motor Material: Polypropylene
• Maximum Operating Pressure: 100 PSI (0.7 MPa)
• Supply Air Pressure Range: 30 to 100 PSI (0.2 - 0.7 MPa)
• Maximum Air Consumption: 56.5 SCFM or 63.6 SCFM
• Liquid Discharge Volume per Cycle: 17 oz or 20 oz
• Spool Valve Type: Looped C® Spring Air Spool
• CE Certified: Yes

Specifications

• Maximum Flow Rate: 50.2 GPM or 58.1 GPM
• Pipe Connection: 1" NPT or 1½" Sanitary Clamp Fitting
• Pump Body Material: Aluminum, Cast Iron or Stainless Steel
• Diaphragm Material: CR (Neoprene™), EPDM (Nordel™), FKM (Viton®), NBR (Buna), PTFE (Teflon®), TPEE (Hytrel™) or TPO (Santoprene®)
• Air Motor Material: Polypropylene
• Maximum Operating Pressure: 100 PSI (0.7 MPa)
• Supply Air Pressure Range: 30 to 100 PSI (0.2 - 0.7 MPa)
• Maximum Air Consumption: 63.6 or 70.6 SCFM
• Liquid Discharge Volume per Cycle: 22 or 27 oz
• Spool Valve Type: Looped C® Spring Air Spool
• CE Certified: Yes
• ATEX Certified: Yes

Specifications

• Maximum Flow Rate: 91.2 or 100.4 GPM
• Pipe Connection: 1½" ANSI flange
• Pump Body Material: PPG or PVDF
• Diaphragm Material: CR (Neoprene™), EPDM (Nordel™), FKM (Viton®), NBR (Buna), PTFE (Teflon®), TPEE (Hytrel™) or TPO (Santoprene®)
• Air Motor Material: Aluminum
• Maximum Operating Pressure: 100 PSI (0.7 MPa)
• Supply Air Pressure Range: 14 or 22 to 100 PSI
• Maximum Air Consumption: 106 or 141 SCFM
• Liquid Discharge Volume per Cycle: 47 or 95 oz
• Spool Valve Type: Coil-Spring Air Spool
• CE Certified: Yes

Specifications

• Maximum Flow Rate: 132.1 GPM, 163.8 GPM or 190.2 GPM
• Pipe Connection: 2" NPT, 2" ANSI flange or 2½" sanitary clamp fitting
• Pump Body Material: Aluminum, Stainless Steel, Cast Iron, PPG or PVDF
• Diaphragm Material: CR (Neoprene™), EPDM (Nordel™), FKM (Viton®), NBR (Buna), PTFE (Teflon®), TPEE (Hytrel™) or TPO (Santoprene®)
• Air Motor Material: Aluminum
• Maximum Operating Pressure: 100 PSI or 125 PSI
• Supply Air Pressure Range: 14 to 125 PSI or 22 to 100 PSI
• Maximum Air Consumption: 141.3 SCFM, 177 SCFM or 212 SCFM
• Liquid Discharge Volume per Cycle: 44 oz, 68 oz or 118 oz
• Spool Valve Type: Coil-Spring Air Spool
• CE Certified: Yes

Specifications

• Maximum Flow Rate: 132.1, 153.2, 200.8 or 211.3 GPM
• Pipe Connection: 3" NPT or 3" ANSI flange
• Pump Body Material: Aluminum, Cast Iron, Stainless Steel or PPG
• Diaphragm Material: CR (Neoprene™), EPDM (Nordel™), FKM (Viton®), NBR (Buna), PTFE (Teflon®), TPEE (Hytrel™) or TPO (Santoprene®)
• Air Motor Material: Aluminum
• Maximum Operating Pressure: 100 or 125 PSI
• Supply Air Pressure Range: 14 to 100, 14 to 125 or 22 to 100 PSI
• Maximum Air Consumption: 177, 194 or 230 SCFM
• Liquid Discharge Volume per Cycle: 44, 108 or 230 oz
• Spool Valve Type: Coil-Spring Air Spool
• CE Certified: Yes

Specifications

• Type: Single head peristaltic
• Output Control: Fixed or adjustable output
• Output: 3, 10, 22, 35 or 50 GPD
• Pressure: 25 psi or 100 psi
• Material: Santoprene or Versilon tube
• Tank: Optionally with tank

Specifications

• Type: Single head peristaltic
• Output Control: Fixed or adjustable output
• Output: 5, 17, 40, 60 or 85 GPD
• Pressure: 25 psi or 100 psi
• Material: Santoprene or Versilon tube
• Tank: Optionally with tank

Specifications

• Type: Double head peristaltic
• Output Control: Fixed output, adjustable output or dual control
• Output: 6, 20, 44, 70 or 100 GPD
• Pressure: 25 psi or 100 psi
• Material: Santoprene or Versilon tube

Specifications

• Type: Double head peristaltic
• Output Control: Fixed output, adjustable output or dual control
• Output: 10, 34, 80, 120 or 170 GPD
• Pressure: 25 psi or 100 psi
• Material: Santoprene or Versilon tube

Specifications

• Type: Variable speed peristaltic
• Output: 5, 17, 40, 60 or 85 GPD
• Pressure: 25 psi or 100 psi
• Tubing: 1/4", 3/8" or 6mm white tubing
• Material: Santoprene or Versilon tube
• Signal: Optional 4-20 mA input
• Weight: 10 lbs

Specifications

• Type: Proportional output peristaltic
• Flowmeter: Optionally with flowmeter
• Flowrate: Dependent on model chosen
• Pressure: 25 psi or 100 psi
• Electrical: 120 or 220 VAC
• Tubing: 1/4" white tubing
• Material: Santoprene tube
• Tank: Optionally with tank

Specifications

• Type: Externally paced peristaltic
• Flowmeter: Optionally with flowmeter
• Output: 4.5, 16 or 30 GPD
• Pressure: 80 psi
• Electrical: 120 VAC 60 Hz
• Power Cable: 6' or 10' power cord
• Tubing: 1/4" white tubing
• Material: Santoprene tube
• Tank: Optionally with tank
• Signal: Dry contact pulse input

Specifications

• Type: Peristaltic with timer module
• Output: 0.6, 1.3, 2.5, 3.4, 5.0, 8.5, 12.3, 15 or 21.7 GPD
• Pressure: 25 psi or 80 psi
• Electrical: 120 VAC 60 Hz
• Power Cable: 6' or 10' power cord
• Tubing: 1/4" white tubing
• Material: Santoprene tube
• Tank: Optionally with tank

Specifications

• Type: Peristaltic Medicator
• Flowmeter: Optionally with flowmeter
• Output: 2.7 oz/min
• Pressure: 80 psi
• Electrical: 120 VAC 60 Hz
• Power Cable: 10' power cord
• Tubing: 1/4" white tubing
• Material: Santoprene tube
• Tank: Optionally with tank
• Signal: Dry contact pulse input

Specifications

• Type: Peristaltic with repeater relay
• Flowmeter: Optionally with flowmeter
• Output: 4.5, 16 or 30 GPD
• Pressure: 80 psi
• Electrical: 120 VAC 60 Hz
• Power Cable: 6' or 10' power cord
• Tubing: 1/4" white tubing
• Material: Santoprene tube
• Tank: Optionally with tank

Specifications

• Type: Low dose peristaltic
• Output: 2.4 or 8.1 ounces/hour
• Pressure: 80 psi
• Material: Santoprene tube
• Tank: Optionally with tank

Specifications

• Type: Simplex
• Size: One piston
• Material: Metal wet end
• Stroke Rate: 6 to 60 strokes per minute
• Motor: Variety of motors available
• Maximum Output: 0.1 to 60 GPH
• Maximum Pressure: 100 to 1000 PSI
• Includes: Pressure relief valve
• Industry: Forestry, mining, general industrial

The V-5 is a heavy duty piston metering pump built for minimum maintenance from quality materials. The pump end of the unit utilizes a precision inline machined casting for minimum wear and strength. The pump is driven by a continuous duty oil filled speed reducer which is available in several ratios for the required stroking rate. The speed reducer will accept any 1750 RPM, 1/2 HP, 56 frame motor with foot mount base, making for limitless options with regard to motor enclosure and supply characteristics. The wet end of the pump is precision machined and utilizes a ground stainless steel piston to minimize packing wear. The check valves are of the double ball check design to insure accurate metering. Various piston sizes are available to give a wide range of volume outputs. The output of the pump is varied from zero to maximum by manually adjusting the piston stroke length or, automatically with a variable speed motor and controller option. All the various piston head sizes are interchangeable which makes application changes in the field simple. All V-5 pumps are supplied with a pressure relief valve for each pump head.

Specifications

• Type: Duplex
• Size: Two pistons
• Stroke Rate: 6 to 60 strokes per minute
• Motor: Variety of motors available
• Maximum Output: 0.1 to 60 GPH per head
• Maximum Pressure: 100 to 1000 PSI
• Includes: Two pressure relief valves (one per head)
• Industry: Forestry, mining, general industrial

The V-5 is a heavy duty piston metering pump built for minimum maintenance from quality materials. The pump end of the unit utilizes a precision inline machined casting for minimum wear and strength. The pump is driven by a continuous duty oil filled speed reducer which is available in several ratios for the required stroking rate. The speed reducer will accept any 1750 RPM, 1/2 HP, 56 frame motor with foot mount base, making for limitless options with regard to motor enclosure and supply characteristics. The wet end of the pump is precision machined and utilizes a ground stainless steel piston to minimize packing wear. The check valves are of the double ball check design to insure accurate metering. Various piston sizes are available to give a wide range of volume outputs. The output of the pump is varied from zero to maximum by manually adjusting the piston stroke length or, automatically with a variable speed motor and controller option. All the various piston head sizes are interchangeable which makes application changes in the field simple. All V-5 pumps are supplied with a pressure relief valve for each pump head.

Specifications

• Type: Triplex
• Size: Three pistons
• Stroke Rate: 6 to 60 strokes per minute
• Motor: Variety of motors available
• Maximum Output: 0.1 to 60 GPH per head
• Maximum Pressure: 100 to 500 PSI
• Includes: Three pressure relief valves (one per head)
• Industry: Forestry, mining, general industrial

The V-5 is a heavy duty piston metering pump built for minimum maintenance from quality materials. The pump end of the unit utilizes a precision inline machined casting for minimum wear and strength. The pump is driven by a continuous duty oil filled speed reducer which is available in several ratios for the required stroking rate. The speed reducer will accept any 1750 RPM, 1/2 HP, 56 frame motor with foot mount base, making for limitless options with regard to motor enclosure and supply characteristics. The wet end of the pump is precision machined and utilizes a ground stainless steel piston to minimize packing wear. The check valves are of the double ball check design to insure accurate metering. Various piston sizes are available to give a wide range of volume outputs. The output of the pump is varied from zero to maximum by manually adjusting the piston stroke length or, automatically with a variable speed motor and controller option. All the various piston head sizes are interchangeable which makes application changes in the field simple. All V-5 pumps are supplied with a pressure relief valve for each pump head.

Specifications

• Type: Quad
• Size: Four pistons
• Stroke Rate: 6 to 60 strokes per minute
• Motor: Variety of motors available
• Maximum Output: 0.1 to 60 GPH per head
• Maximum Pressure: 100 to 500 PSI
• Includes: Four pressure relief valves (one per head)
• Industry: Forestry, mining, general industrial

The V-5 is a heavy duty piston metering pump built for minimum maintenance from quality materials. The pump end of the unit utilizes a precision inline machined casting for minimum wear and strength. The pump is driven by a continuous duty oil filled speed reducer which is available in several ratios for the required stroking rate. The speed reducer will accept any 1750 RPM, 1/2 HP, 56 frame motor with foot mount base, making for limitless options with regard to motor enclosure and supply characteristics. The wet end of the pump is precision machined and utilizes a ground stainless steel piston to minimize packing wear. The check valves are of the double ball check design to insure accurate metering. Various piston sizes are available to give a wide range of volume outputs. The output of the pump is varied from zero to maximum by manually adjusting the piston stroke length or, automatically with a variable speed motor and controller option. All the various piston head sizes are interchangeable which makes application changes in the field simple. All V-5 pumps are supplied with a pressure relief valve for each pump head.

Specifications

• Type: Mini
• Material: Polyethylene or stainless steel wet end
• Stroke Rate: 2 to 60 strokes per minute
• Motor: 1/20 or 1/12 HP TEFC gear motor
• Electrical: 120 VAC 60 Hz 1 Ph
• Maximum Output: 0.04 to 2 GPH
• Maximum Pressure: 100 PSI
• Item Weight: 25 lbs

The V-6 diaphragm pump is a compact unit designed for lighter metering applications.

Specifications

• Type: Mini
• Material: 303 SS head and check valves with polyethylene injection and foot valves
• Stroke Rate: 2 to 60 strokes per minute
• Motor: 1/20 or 1/12 HP TEFC gear motor
• Electrical: 120 VAC 60 Hz 1 Ph
• Maximum Output: 0.04 to 2 GPH
• Maximum Pressure: 100 PSI
• Item Weight: 25 lbs

The V-7 piston pump is a compact unit designed for lighter metering applications.

Specifications

• Type: Simplex
• Size: One piston
• Material: Carbon steel, 303 or 316 stainless steel
• Stroke Rate: 6 to 60 strokes per minute
• Motor: Variety of motors available
• Maximum Output: 0.1 to 60 GPH
• Maximum Pressure: 100 to 1000 PSI
• Includes: Pressure relief valve
• Industry: Forestry, mining, general industrial

The V-10 is a heavy duty piston metering pump built for minimum maintenance from quality materials. The pump end of the unit utilizes a precision inline machined casting for minimum wear and strength. The pump is driven by a continuous duty oil filled speed reducer which is available in several ratios for the required stroking rate. The speed reducer will accept any 56C frame motor which makes for limitless options as far as motor enclosure and supply characteristics. The wet end of the pump is precision machined and utilizes a ground stainless steel piston to minimize packing wear. The check valves are of the double ball check design to insure accurate metering. Various piston sizes are available to give a wide range of volume outputs. The output of the pump is varied from zero to maximum by manually adjusting the piston stroke length or, automatically with a variable speed motor and controller option. All the various piston head sizes are interchangeable which makes application changes in the field simple. The standard simplex pump can readily be converted to a duplex pump in the field. All V-10 pumps are supplied with a pressure relief valve for each pump head. A vertical motor option is available - call or email us for details.

Specifications

• Type: Simplex
• Size: One piston
• Material: Carpenter 20 or Hastelloy C wet end
• Stroke Rate: 6 to 60 strokes per minute
• Motor: Variety of motors available
• Maximum Output: 0.1 to 60 GPH
• Maximum Pressure: 100 to 1000 PSI
• Includes: Pressure relief valve
• Industry: Forestry, mining, general industrial

The V-10 is a heavy duty piston metering pump built for minimum maintenance from quality materials. The pump end of the unit utilizes a precision inline machined casting for minimum wear and strength. The pump is driven by a continuous duty oil filled speed reducer which is available in several ratios for the required stroking rate. The speed reducer will accept any 56C frame motor which makes for limitless options as far as motor enclosure and supply characteristics. The wet end of the pump is precision machined and utilizes a ground stainless steel piston to minimize packing wear. The check valves are of the double ball check design to insure accurate metering. Various piston sizes are available to give a wide range of volume outputs. The output of the pump is varied from zero to maximum by manually adjusting the piston stroke length or, automatically with a variable speed motor and controller option. All the various piston head sizes are interchangeable which makes application changes in the field simple. The standard simplex pump can readily be converted to a duplex pump in the field. All V-10 pumps are supplied with a pressure relief valve for each pump head. A vertical motor option is available - call or email us for details.

Specifications

• Type: Duplex
• Size: Two pistons
• Material: Carbon steel, 303 or 316 stainless steel
• Stroke Rate: 6 to 60 strokes per minute
• Motor: Variety of motors available
• Maximum Output: 0.1 to 60 GPH per head
• Maximum Pressure: 100 to 1000 PSI
• Includes: Two pressure relief valves (one per head)
• Industry: Forestry, mining, general industrial

The V-10 is a heavy duty piston metering pump built for minimum maintenance from quality materials. The pump end of the unit utilizes a precision inline machined casting for minimum wear and strength. The pump is driven by a continuous duty oil filled speed reducer which is available in several ratios for the required stroking rate. The speed reducer will accept any 56C frame motor which makes for limitless options as far as motor enclosure and supply characteristics. The wet end of the pump is precision machined and utilizes a ground stainless steel piston to minimize packing wear. The check valves are of the double ball check design to insure accurate metering. Various piston sizes are available to give a wide range of volume outputs. The output of the pump is varied from zero to maximum by manually adjusting the piston stroke length or, automatically with a variable speed motor and controller option. All the various piston head sizes are interchangeable which makes application changes in the field simple. All V-10 pumps are supplied with a pressure relief valve for each pump head. A vertical motor option is available - call or email us for details.

Specifications

• Type: Duplex
• Size: Two pistons
• Material: Carpenter 20 or Hastelloy C wet end
• Stroke Rate: 6 to 60 strokes per minute
• Motor: Variety of motors available
• Maximum Output: 0.1 to 60 GPH per head
• Maximum Pressure: 100 to 1000 PSI
• Includes: Two pressure relief valves (one per head)
• Industry: Forestry, mining, general industrial

The V-10 is a heavy duty piston metering pump built for minimum maintenance from quality materials. The pump end of the unit utilizes a precision inline machined casting for minimum wear and strength. The pump is driven by a continuous duty oil filled speed reducer which is available in several ratios for the required stroking rate. The speed reducer will accept any 56C frame motor which makes for limitless options as far as motor enclosure and supply characteristics. The wet end of the pump is precision machined and utilizes a ground stainless steel piston to minimize packing wear. The check valves are of the double ball check design to insure accurate metering. Various piston sizes are available to give a wide range of volume outputs. The output of the pump is varied from zero to maximum by manually adjusting the piston stroke length or, automatically with a variable speed motor and controller option. All the various piston head sizes are interchangeable which makes application changes in the field simple. All V-10 pumps are supplied with a pressure relief valve for each pump head. A vertical motor option is available - call or email us for details.

Specifications

• Type: Triplex
• Size: Three pistons
• Material: Carbon steel, 303 or 316 stainless steel
• Stroke Rate: 6 to 60 strokes per minute
• Motor: Variety of motors available
• Maximum Output: 0.1 to 60 GPH per head
• Maximum Pressure: 100 to 500 PSI
• Includes: Three pressure relief valves (one per head)
• Industry: Forestry, mining, general industrial

The V-10 is a heavy duty piston metering pump built for minimum maintenance from quality materials. The pump end of the unit utilizes a precision inline machined casting for minimum wear and strength. The pump is driven by a continuous duty oil filled speed reducer which is available in several ratios for the required stroking rate. The speed reducer will accept any 56C frame motor which makes for limitless options as far as motor enclosure and supply characteristics. The wet end of the pump is precision machined and utilizes a ground stainless steel piston to minimize packing wear. The check valves are of the double ball check design to insure accurate metering. Various piston sizes are available to give a wide range of volume outputs. The output of the pump is varied from zero to maximum by manually adjusting the piston stroke length or, automatically with a variable speed motor and controller option. All the various piston head sizes are interchangeable which makes application changes in the field simple. All V-10 pumps are supplied with a pressure relief valve for each pump head. A vertical motor option is available - call or email us for details.

Specifications

• Type: Triplex
• Size: Three pistons
• Material: Carpenter 20 or Hastelloy C wet end
• Stroke Rate: 6 to 60 strokes per minute
• Motor: Variety of motors available
• Maximum Output: 0.1 to 60 GPH per head
• Maximum Pressure: 100 to 500 PSI
• Includes: Three pressure relief valves (one per head)
• Industry: Forestry, mining, general industrial

The V-10 is a heavy duty piston metering pump built for minimum maintenance from quality materials. The pump end of the unit utilizes a precision inline machined casting for minimum wear and strength. The pump is driven by a continuous duty oil filled speed reducer which is available in several ratios for the required stroking rate. The speed reducer will accept any 56C frame motor which makes for limitless options as far as motor enclosure and supply characteristics. The wet end of the pump is precision machined and utilizes a ground stainless steel piston to minimize packing wear. The check valves are of the double ball check design to insure accurate metering. Various piston sizes are available to give a wide range of volume outputs. The output of the pump is varied from zero to maximum by manually adjusting the piston stroke length or, automatically with a variable speed motor and controller option. All the various piston head sizes are interchangeable which makes application changes in the field simple. All V-10 pumps are supplied with a pressure relief valve for each pump head. A vertical motor option is available - call or email us for details.

Specifications

• Type: Quad
• Size: Four pistons
• Material: Carbon steel, 303 or 316 stainless steel
• Stroke Rate: 6 to 60 strokes per minute
• Motor: Variety of motors available
• Maximum Output: 0.1 to 60 GPH per head
• Maximum Pressure: 100 to 500 PSI
• Includes: Four pressure relief valves (one per head)
• Industry: Forestry, mining, general industrial

The V-10 is a heavy duty piston metering pump built for minimum maintenance from quality materials. The pump end of the unit utilizes a precision inline machined casting for minimum wear and strength. The pump is driven by a continuous duty oil filled speed reducer which is available in several ratios for the required stroking rate. The speed reducer will accept any 56C frame motor which makes for limitless options as far as motor enclosure and supply characteristics. The wet end of the pump is precision machined and utilizes a ground stainless steel piston to minimize packing wear. The check valves are of the double ball check design to insure accurate metering. Various piston sizes are available to give a wide range of volume outputs. The output of the pump is varied from zero to maximum by manually adjusting the piston stroke length or, automatically with a variable speed motor and controller option. All the various piston head sizes are interchangeable which makes application changes in the field simple. All V-10 pumps are supplied with a pressure relief valve for each pump head. A vertical motor option is available - call or email us for details.

Specifications

• Type: Quad
• Size: Four pistons
• Material: Carpenter 20 or Hastelloy C wet end
• Stroke Rate: 6 to 60 strokes per minute
• Motor: Variety of motors available
• Maximum Output: 0.1 to 60 GPH per head
• Maximum Pressure: 100 to 500 PSI
• Includes: Four pressure relief valves (one per head)
• Industry: Forestry, mining, general industrial

The V-10 is a heavy duty piston metering pump built for minimum maintenance from quality materials. The pump end of the unit utilizes a precision inline machined casting for minimum wear and strength. The pump is driven by a continuous duty oil filled speed reducer which is available in several ratios for the required stroking rate. The speed reducer will accept any 56C frame motor which makes for limitless options as far as motor enclosure and supply characteristics. The wet end of the pump is precision machined and utilizes a ground stainless steel piston to minimize packing wear. The check valves are of the double ball check design to insure accurate metering. Various piston sizes are available to give a wide range of volume outputs. The output of the pump is varied from zero to maximum by manually adjusting the piston stroke length or, automatically with a variable speed motor and controller option. All the various piston head sizes are interchangeable which makes application changes in the field simple. All V-10 pumps are supplied with a pressure relief valve for each pump head. A vertical motor option is available - call or email us for details.

Efficient means of lifting large quantities of water or wastewater at low heads.

• Variety of applications, ranging from return activated sludge to stormwater pumping
• Widely accepted by engineers because of their proven design and trouble-free operation
• More than 1,200 screw pump installations.

PosiFlow and Flow Checker flow verification sensors for Walchem metering pumps.

Mounting Brackets for Walchem metering pumps. Wall mounting for E Series pumps, and a mounting base for LK Series pumps.