The general purpose non-intrusive capacitance level switch provides reliable liquid level detection of water based conductive liquids with non-coating and/or scaling characteristics with a 1A relay output. Media examples include hydrochloric, sulfuric acid and water. The liquid level sensor is bracket mounted on the exterior wall of non-metallic tanks and applied as a high level alarm or low level alarm.
Non-intrusive level detection through plastic or fiberglass walls
60VA relay selectable NO or NC via power supply wiring polarity
Use as a high or low level switch
Rugged PSO enclosure rated NEMA 4X with conduit connector
Great for non-metallic or FRP tanks up to 1″ thick
Installed with polyethylene, polypropylene or PVDF adhesive 3M mounting brackets
Three different bracket materials makes attachment to tank easy
Accuracy: ± 1mm in water
Repeatability: ± 0.5mm in water
Dielectric range: >10 constants
Conductive range: >100 µ
Consumption: 25 mA maximum
Contact rating: 60 VA, 1A maximum
Further Information
See Downloads tab.
Shipping
Promag Enviro provides free shipping throughout Canada and the U.S.
See Terms and Conditions.
