Specifications

• Type: For Cold or Hot Water
• Pipe Connection: 3/4", 1", 1½", or 2" NPT
• Output: Optional Pulse Output
• Pulse Rate:
• Series: MJ Series
• Regulatory: Not certified to NSF/ANSI 62

Specifications

• Pipe Connection: 3/4", 1", 1½", or 2" NPT
• Usage: For Potable Cold Water
• Output: Optional Pulse Output
• Pulse Rate:
• Series: MJN Series
• Regulatory: Certified to NSF/ANSI Standard 61
• Features:
  • Dry top multi-jet design
  • Tolerates low quality water
  • Simple pulse output
• Applications:
  • Potable water
  • Cooling tower chemical control
  • Industrial water treatment
  • Deduct metering
  • Pump pacing

Specifications

• Type: Dry Register Mechanical Totalizing
• Pipe Connection: 2" - 8" ANSI 150# flange
• Output: Optional dry contact (reed switch)
• Series: WJ Series
• Includes: Gaskets
• Features:
  • Non-resettable mechanical totalizer
  • 2, 3, 4, 6, 8” pipe sizes
  • Optional pulse output
  • Rugged construction
  • Accurate and economical
• Applications:
  • Remote totalizing
  • Pacing electronic metering pumps
  • Cooling water monitoring
  • Industrial fluid control
  • Water/Wastewater treatment

Specifications

• Pipe Connection: 1" to 3"
• Power: DC or Battery Versions Available
• Tamper Evidence: Tamper-evident kit option available
• Environmental: NEMA 3X, IP64
• Features:
  • No moving parts
  • Minimal straight pipe required
  • Battery powered (WMP104 only)
  • Built-in rate & total indicator
  • Corrosion resistant
  • Pulse output (WMP101 only)
• Applications:
  • Industrial wastewater discharge
  • Grey water
  • Well monitoring
  • Irrigation
  • Mining

Specifications

• Pipe Connection: 3" - 6" slip fit or flange
• Material: PVC with PVDF (Kynar®) rotor
• Total: Resettable and non-resettable versions
• Cover: Optional hinged display cover
• Series: WT Series
• Regulatory: CE
• Features:
  • One moving part
  • Low friction jewel bearings
  • Field repairable
• Applications:
  • Water treatment
  • Municipal
  • Cooling water monitoring
  • Industrial flow control

Specifications

• Pipe Connection: 3" - 8" ANSI 150# flange
• Material: Stainless steel with PVDF rotor
• Total: Resettable and non-resettable versions
• Cover: Optional hinged display cover
• Series: WT Series
• Regulatory: CE
• Features:
  • One moving part
  • Low friction jewel bearings
  • Field repairable
• Applications:
  • Water treatment
  • Municipal
  • Cooling water monitoring
  • Industrial flow control

Specifications

• Type: Base Model
• Size: 2" to 12" available
• Pipe Connection: 150 lb ANSI Pattern Flanges
• Material: Epoxy-coated welded steel body, Santoprene flange liner, polypropylene body liner, 316 SS electrodes, powder-coated diecast aluminum electronics housing
• Power: DC or Battery Powered
• Output: Pulse output plus optional outputs available
• Logging: Optional data logger
• Pulse Rate: 0.1 to 99,999.9 volume units/pulse
• Cable: 20 to 200 foot power/output cable available
• Series: iMAG 4700 series
• Environmental: NEMA 6P/IP68
• Regulatory: CE (EN 61326), Certified to NSF/ANSI standard 61 (60°C)
• Features: Integral display
• Applications: Water and wastewater treatment, municipal, pump skids, pump stations, packaged plants, filtration systems, reclaimed water, hydraulic fracturing

Specifications

• Type: Premium Model
• Size: 2" to 12" available
• Pipe Connection: 150 lb ANSI Pattern Flanges
• Material: Epoxy-coated welded steel body, Santoprene flange liner, polypropylene body liner, 316 SS electrodes, powder-coated diecast aluminum electronics housing
• Power: AC or DC powered
• Output: Pulse and 4-20 mA plus optional outputs available
• Logging: Optional data logger
• Pulse Rate: 0.1 to 99,999.9 volume units/pulse
• Cable: 20 to 200 foot power/output cable available
• Series: iMAG 4700 series
• Environmental: NEMA 6P/IP68
• Regulatory: CE (EN 61326), Certified to NSF/ANSI standard 61 (60°C)
• Features: Integral display
• Applications: Water and wastewater treatment, municipal, pump skids, pump stations, packaged plants, filtration systems, reclaimed water, hydraulic fracturing

Specifications

• Type: Remote Display Model
• Size: 2" to 12" available
• Pipe Connection: 150 lb ANSI Pattern Flanges
• Material: Epoxy-coated welded steel body, Santoprene flange liner, polypropylene body liner, 316 SS electrodes, powder-coated diecast aluminum electronics housing
• Power: AC or DC powered
• Output: Pulse output plus optional outputs available
• Logging: Optional data logger
• Pulse Rate: 0.1 to 99,999.9 volume units/pulse
• Cable: 20 to 200 foot power/output cable available
• Remote Display Cable: 20 to 200 foot remote display cable available
• Series: iMAG 4700 series
• Environmental: NEMA 6P/IP68
• Regulatory: CE (EN 61326), Certified to NSF/ANSI standard 61 (60°C)
• Features: Remote display
• Applications: Water and wastewater treatment, municipal, pump skids, pump stations, packaged plants, filtration systems, reclaimed water, hydraulic fracturing

• Bronze Multi-Jet Water Meters
• Totalizing only, or with a Hall effect or reed switch pulse output
• Available in sizes from 3/4" to 2" for flow rates from 0.22 to 132 USGPM.
• Material Body: Cast Bronze
• Material Internals: Engineered Thermoplastic
• Material Magnet: Alnico
• Reed switch
• Dry contact closure
• Power not required
• Accuracy: +/- 1.5% of reading
• Maximum Temperature: 105°F (40°C)
• Maximum Pressure: 150 psi (10.3 bar)
• Maximum Current: 20 mA
• Maximum Voltage: 24 Vdc or Vac
• Size: 3/4" to 2"

Specifications

• Series: WFP
• Type: 1/2" to 6", PVC

Specifications

• Type: Single Jet Stainless Steel
• Pipe Connection: 1/2", 3/4", or 1" FNPT
• Material: 316 SS Body & Cover with PVDF Rotor
• Output: Current Sinking Pulse Output (6–24 VDC)
• Rate: Max 10, 15, or 25 GPM
• Cable: 18' Cable
• Weight: 4 lbs
• Features:
  • Accurate at low flows
  • Simple and durable
  • Rugged body
  • High tolerance for problem fluids
• Applications:
  • Low flow monitoring
  • Chemical batching
  • Proportional chemical injection
  • Fertilizer injection

Specifications

• Type: Single Jet Teflon
• Pipe Connection: 3/8", 1/2", 3/4", or 1" FNPT, SAE, or BSP
• Material: TFE Teflon® Body & Cover with PVDF (Kynar®) Rotor
• Output: Current Sinking Pulse Output (6–24 VDC)
• Rate: Max 5, 10, 20, or 40 GPM
• Cable: 18' (6 m) Cable
• Series: S Series
• Weight: 2 lbs
• Features:
  • Accurate at low flows
  • Simple and durable
  • Compatible with most chemicals
• Applications:
  • Low flow monitoring
  • Chemical batching
  • Proportional chemical injection
  • Fertilizer injection

Specifications

• Type: Single Jet Polypropylene
• Pipe Connection: 3/8", 1/2", 3/4", or 1" FNPT, SAE, or BSP
• Material: Polypropylene Body with PVDF (Kynar®) Rotor
• Output: Current Sinking Pulse Output (6–24 VDC)
• Rate: Max 5, 10, 20, or 40 GPM
• Cover: Acrylic or Polypropylene Cover
• Cable: 18' (6 m) Cable
• Series: S Series
• Weight: 2 lbs
• Features:
  • Accurate at low flows
  • Simple and durable
  • Compatible with a variety of chemicals
  • Visual flow monitoring
• Applications:
  • Low flow monitoring
  • Chemical batching
  • Proportional chemical injection
  • Fertilizer injection

Specifications

• Size: 2 sizes available
• Pipe Connection: Various fittings options available
• Material: PVDF with HDPE housing
• Power: 10–15 VDC, 150 mA
• Output: Pulse and 4-20 mA
• Pulse Rate: 500 or 1000 pulses/liter
• Environmental: NEMA 4X, IP66
• Includes: 20' cable
• Weight: 5 lbs
• Features:
  • No moving parts
  • Requires no straight pipe
  • Pulse and/or 4-20 mA output
  • Chemical and corrosion resistant
  • Insensitive to fluid density and fluid viscosity changes
• Applications:
  • Chemical injection
  • Corrosive materials
  • Low flow applications
  • Pulsating flows (e.g., metering pump)

Specifications

• Type: Sensor Only
• Material: Brass, PVC, 316 SS or polypropylene with PVDF (Kynar®) rotor
• Usage: for 1/2"-8" pipes
• Power: Micropower pickup option available (for battery powered meters)
• Connector: Available with pump/control connector
• O-ring: EPDM or Viton® O-ring
• Rotor Shaft: Tungsten carbide rotor shaft (ceramic or silicon carbide optional)
• Series: IP800 Series
• Environmental: Immersible option available
• Regulatory: CE
• Not Included: The sensors need to be mated with a special tee, saddle or weld fitting, to match whatever your application requires.
• Features:
  • High quality ruby bearings and carbide or ceramic rotor shaft ensure long life and excellent low-flow performance
  • Only one moving part that's easily replaced
  • Paddlewheel machined from solid rod for maximum low-flow performance
  • No magnetic drag on the paddlewheel rotor as it uses a Hall-effect sensor
  • Insertion design is economical and easy to install
  • Choice of materials for compatibility with variety of chemicals
• Applications:
  • Water treatment
  • Industrial wastewater treatment
  • Cooling water monitoring
  • Industrial fluid control
  • Chemical proportioning

Specifications

• Type: With Mounted FT430
• Material: Brass, PVC, 316 SS or polypropylene with PVDF (Kynar®) rotor
• Usage: for 1/2"-8" pipes
• Power Supply: Externally powered
• Output: 2 pulse outputs
• Logging: Optional data logger
• Total: Resettable and non-resettable versions
• Tamper Evidence: Tamper-evident kit option available
• Cover: Optional hinged display cover
• O-Ring: EPDM or Viton® O-ring
• Rotor Shaft: Tungsten carbide rotor shaft (ceramic or silicon carbide optional)
• Series: IP800 Series
• Regulatory: CE
• Includes: Rate and total indicator
• Not Included: The sensors need to be mated with a special tee, saddle or weld fitting, to match whatever your application requires.
• Features:
  • High quality ruby bearings and carbide or ceramic rotor shaft ensure long life and excellent low-flow performance
  • Only one moving part that's easily replaced
  • Paddlewheel machined from solid rod for maximum low-flow performance
  • No magnetic drag on the paddlewheel rotor as it uses a Hall-effect sensor
  • Insertion design is economical and easy to install
  • Choice of materials for compatibility with variety of chemicals
  • Durable powder-coated aluminum housings for electronics
• Applications:
  • Water treatment
  • Industrial wastewater treatment
  • Cooling water monitoring
  • Industrial fluid control
  • Chemical proportioning

Specifications

• Type: With Mounted DL76
• Material: Brass, PVC, 316 SS or polypropylene with PVDF (Kynar®) rotor
• Usage: for 1/2"-8" pipes
• Tamper Evidence: Tamper-evident kit option available
• O-Ring: EPDM or Viton® O-ring
• Rotor Shaft: Tungsten carbide rotor shaft (ceramic or silicon carbide optional)
• Series: IP800 Series
• Regulatory: CE
• Includes: Data-Logger module
• Not Included: The sensors need to be mated with a special tee, saddle or weld fitting, to match whatever your application requires. Connection to a laptop requires a DC3 cable.
• Features:
  • High quality ruby bearings and carbide or ceramic rotor shaft ensure long life and excellent low-flow performance
  • Only one moving part that's easily replaced
  • Paddlewheel machined from solid rod for maximum low-flow performance
  • No magnetic drag on the paddlewheel rotor as it uses a Hall-effect sensor
  • Insertion design is economical and easy to install
  • Choice of materials for compatibility with variety of chemicals
  • Durable powder-coated aluminum housings for electronics
• Applications:
  • Water treatment
  • Industrial wastewater treatment
  • Cooling water monitoring
  • Industrial fluid control
  • Chemical proportioning

Specifications

• Type: With Mounted FT450
• Material: Brass, PVC, 316 SS or polypropylene with PVDF (Kynar®) rotor
• Usage: for 1/2"-8" pipes
• Power Supply: Battery powered
• Output: 2 pulse outputs
• Total: Resettable and non-resettable versions
• Tamper Evidence: Tamper-evident kit option available
• Cover: Optional hinged display cover
• O-ring: EPDM or Viton® O-ring
• Rotor Shaft: Tungsten carbide rotor shaft (ceramic or silicon carbide optional)
• Series: IP800 Series
• Regulatory: CE
• Includes: Rate and total indicator
• Not Included: The sensors need to be mated with a special tee, saddle or weld fitting, to match whatever your application requires.
• Features:
  • High quality ruby bearings and carbide or ceramic rotor shaft ensure long life and excellent low-flow performance
  • Only one moving part that's easily replaced
  • Paddlewheel machined from solid rod for maximum low-flow performance
  • No magnetic drag on the paddlewheel rotor as it uses a Hall-effect sensor
  • Insertion design is economical and easy to install
  • Choice of materials for compatibility with variety of chemicals
  • Durable powder-coated aluminum housings for electronics
• Applications:
  • Water treatment
  • Industrial wastewater treatment
  • Cooling water monitoring
  • Industrial fluid control
  • Chemical proportioning

Specifications

• Type: With Mounted FT440
• Material: Brass, PVC, 316 SS or polypropylene with PVDF (Kynar®) rotor
• Usage: for 1/2"-8" pipes
• Power Supply: Loop powered
• Output: 2 pulse outputs and 1 analog 4-20 mA output
• Total: Resettable and non-resettable versions
• Tamper Evidence: Tamper-evident kit option available
• Cover: Optional hinged display cover
• O-ring: EPDM or Viton® O-ring
• Rotor Shaft: Tungsten carbide rotor shaft (ceramic or silicon carbide optional)
• Series: IP800 Series
• Regulatory: CE
• Includes: Rate and total indicator
• Not Included: The sensors need to be mated with a special tee, saddle or weld fitting, to match whatever your application requires.
• Features:
  • High quality ruby bearings and carbide or ceramic rotor shaft ensure long life and excellent low-flow performance
  • Only one moving part that's easily replaced
  • Paddlewheel machined from solid rod for maximum low-flow performance
  • No magnetic drag on the paddlewheel rotor as it uses a Hall-effect sensor
  • Insertion design is economical and easy to install
  • Choice of materials for compatibility with variety of chemicals
  • Durable powder-coated aluminum housings for electronics
• Applications:
  • Water treatment
  • Industrial wastewater treatment
  • Cooling water monitoring
  • Industrial fluid control
  • Chemical proportioning

Specifications

• Type: Sensor Only
• Material: Brass, PVC or 316 SS with PVDF (Kynar®) rotor
• Usage: for 3"-40" pipes (up to 64" optional)
• Power: Micropower pickup option available (for battery powered meters)
• Connector: Available with pump/control connector
• Adapter Fitting: 1½" or 2" NPT adapter fitting
• Rotor Shaft: Tungsten carbide rotor shaft (ceramic or silicon carbide optional)
• Series: IP100/200 Series
• Environmental: Immersible option available
• Regulatory: CE (standard power only)
• Not Included: The sensors need to be mated with a fitting such as the Seametrics saddle fitting, to match whatever your application requires.
• Features:
  • High quality ruby bearings and carbide or ceramic rotor shaft ensure long life and excellent low-flow performance
  • Only one moving part that's easily replaced
  • Paddlewheel machined from solid rod for maximum low-flow performance
  • No magnetic drag on the paddlewheel rotor as it uses a Hall-effect sensor
  • Adjustable depth insertion design allows the unit to be installed in a variety of pipes of different sizes
  • PVDF rotor
  • Choice of sensor materials for compatibility with variety of chemicals
• Applications:
  • Clean water
  • Aquariums, water parks
  • Control of chemical metering pumps
  • Connection to PLCs
  • Water and wastewater monitoring

Specifications

• Type: With Mounted FT430
• Material: Brass, PVC or 316 SS with PVDF (Kynar®) rotor
• Usage: for 3"-40" pipes (up to 64" optional)
• Power Supply: Externally powered
• Output: 2 pulse outputs
• Total: Resettable and non-resettable versions
• Tamper Evidence: Tamper-evident kit option available
• Cover: Optional hinged display cover
• Adapter Fitting: 1½" or 2" NPT adapter fitting
• Rotor Shaft: Tungsten carbide rotor shaft (ceramic or silicon carbide optional)
• Series: IP100/200 Series
• Regulatory: CE
• Includes: Rate and total indicator
• Not Included: The sensors need to be mated with a fitting such as the Seametrics saddle fitting, to match whatever your application requires.
• Features:
  • High quality ruby bearings and carbide or ceramic rotor shaft ensure long life and excellent low-flow performance
  • Only one moving part that's easily replaced
  • Paddlewheel machined from solid rod for maximum low-flow performance
  • No magnetic drag on the paddlewheel rotor as it uses a Hall-effect sensor
  • Adjustable depth insertion design allows the unit to be installed in a variety of pipes of different sizes
  • PVDF rotor
  • Choice of sensor materials for compatibility with variety of chemicals
  • Durable powder-coated aluminum housings for electronics
• Applications:
  • Clean water
  • Aquariums, water parks
  • Control of chemical metering pumps
  • Connection to PLCs
  • Water and wastewater monitoring

Specifications

• Type: With Mounted DL76
• Material: Brass, PVC or 316 SS with PVDF (Kynar®) rotor
• Usage: for 3"-40" pipes (up to 64" optional)
• Tamper Evidence: Tamper-evident kit option available
• Adapter Fitting: 1½" or 2" NPT adapter fitting
• Rotor Shaft: Tungsten carbide rotor shaft (ceramic or silicon carbide optional)
• Series: IP100/200 Series
• Includes: Data-Logger module
• Not Included: The sensors need to be mated with a fitting such as the Seametrics saddle fitting, to match whatever your application requires. Connection to a laptop requires a DC3 cable.
• Features:
  • High quality ruby bearings and carbide or ceramic rotor shaft ensure long life and excellent low-flow performance
  • Only one moving part that's easily replaced
  • Paddlewheel machined from solid rod for maximum low-flow performance
  • No magnetic drag on the paddlewheel rotor as it uses a Hall-effect sensor
  • Adjustable depth insertion design allows the unit to be installed in a variety of pipes of different sizes
  • PVDF rotor
  • Choice of sensor materials for compatibility with variety of chemicals
  • Durable powder-coated aluminum housings for electronics
• Applications:
  • Clean water
  • Aquariums, water parks
  • Control of chemical metering pumps
  • Connection to PLCs
  • Water and wastewater monitoring

Specifications

• Type: With Mounted FT450
• Material: Brass, PVC or 316 SS with PVDF (Kynar®) rotor
• Usage: for 3"-40" pipes (up to 64" optional)
• Power Supply: Battery powered
• Output: 2 pulse outputs
• Total: Resettable and non-resettable versions
• Tamper Evidence: Tamper-evident kit option available
• Cover: Optional hinged display cover
• Adapter Fitting: 1½" or 2" NPT adapter fitting
• Rotor Shaft: Tungsten carbide rotor shaft (ceramic or silicon carbide optional)
• Series: IP100/200 Series
• Includes: Rate and total indicator
• Not Included: The sensors need to be mated with a fitting such as the Seametrics saddle fitting, to match whatever your application requires.
• Features:
  • High quality ruby bearings and carbide or ceramic rotor shaft ensure long life and excellent low-flow performance
  • Only one moving part that's easily replaced
  • Paddlewheel machined from solid rod for maximum low-flow performance
  • No magnetic drag on the paddlewheel rotor as it uses a Hall-effect sensor
  • Adjustable depth insertion design allows the unit to be installed in a variety of pipes of different sizes
  • PVDF rotor
  • Choice of sensor materials for compatibility with variety of chemicals
  • Durable powder-coated aluminum housings for electronics
• Applications:
  • Clean water
  • Aquariums, water parks
  • Control of chemical metering pumps
  • Connection to PLCs
  • Water and wastewater monitoring

Specifications

• Type: With Mounted FT440
• Material: Brass, PVC or 316 SS with PVDF (Kynar®) rotor
• Usage: for 3"-40" pipes (up to 64" optional)
• Power Supply: Loop powered
• Output: 2 pulse outputs and 1 analog 4-20 mA output
• Total: Resettable and non-resettable versions
• Tamper Evidence: Tamper-evident kit option available
• Cover: Optional hinged display cover
• Adapter Fitting: 1½" or 2" NPT adapter fitting
• Rotor Shaft: Tungsten carbide rotor shaft (ceramic or silicon carbide optional)
• Series: IP100/200 Series
• Regulatory: CE
• Includes: Rate and total indicator
• Not Included: The sensors need to be mated with a fitting such as the Seametrics saddle fitting, to match whatever your application requires.
• Features:
  • High quality ruby bearings and carbide or ceramic rotor shaft ensure long life and excellent low-flow performance
  • Only one moving part that's easily replaced
  • Paddlewheel machined from solid rod for maximum low-flow performance
  • No magnetic drag on the paddlewheel rotor as it uses a Hall-effect sensor
  • Adjustable depth insertion design allows the unit to be installed in a variety of pipes of different sizes
  • PVDF rotor
  • Choice of sensor materials for compatibility with variety of chemicals
  • Durable powder-coated aluminum housings for electronics
• Applications:
  • Clean water
  • Aquariums, water parks
  • Control of chemical metering pumps
  • Connection to PLCs
  • Water and wastewater monitoring

Specifications

• Type: Sensor Only
• Material: Brass, PVC or 316 SS with PVDF (Kynar®) rotor
• Usage: for 3"-40" pipes (up to 64" optional)
• Power: Micropower pickup option available (for battery powered meters)
• Connector: Available with pump/control connector
• Rotor Shaft: Tungsten carbide rotor shaft (ceramic or silicon carbide optional)
• Series: IP100/200 Series
• Environmental: Immersible option available
• Regulatory: CE (standard power only)
• Not Included: The sensors need to be mated with a fitting such as the Seametrics saddle fitting, to match whatever your application requires.
• Features:
  • Hot tap: Insert or remove without depressurizing pipe
  • High quality ruby bearings and carbide or ceramic rotor shaft ensure long life and excellent low-flow performance
  • Only one moving part that's easily replaced
  • Paddlewheel machined from solid rod for maximum low-flow performance
  • No magnetic drag on the paddlewheel rotor as it uses a Hall-effect sensor
  • Adjustable depth insertion design allows the unit to be installed in a variety of pipes of different sizes
  • PVDF rotor
  • Choice of materials for compatibility with variety of chemicals
• Applications:
  • Clean water
  • Aquariums, water parks
  • Control of chemical metering pumps
  • Connection to PLCs
  • Water and wastewater monitoring

Specifications

• Type: With Mounted FT430
• Material: Brass, PVC or 316 SS with PVDF (Kynar®) rotor
• Usage: for 3"-40" pipes (up to 64" optional)
• Power Supply: Externally powered
• Output: 2 pulse outputs
• Total: Resettable and non-resettable versions
• Tamper Evidence: Tamper-evident kit option available
• Cover: Optional hinged display cover
• Rotor Shaft: Tungsten carbide rotor shaft (ceramic or silicon carbide optional)
• Series: IP100/200 Series
• Regulatory: CE
• Includes: Rate and total indicator
• Not Included: The sensors need to be mated with a fitting such as the Seametrics saddle fitting, to match whatever your application requires.
• Features:
  • Hot tap: Insert or remove without depressurizing pipe
  • High quality ruby bearings and carbide or ceramic rotor shaft ensure long life and excellent low-flow performance
  • Only one moving part that's easily replaced
  • Paddlewheel machined from solid rod for maximum low-flow performance
  • No magnetic drag on the paddlewheel rotor as it uses a Hall-effect sensor
  • Adjustable depth insertion design allows the unit to be installed in a variety of pipes of different sizes
  • PVDF rotor
  • Choice of materials for compatibility with variety of chemicals
• Applications:
  • Clean water
  • Aquariums, water parks
  • Control of chemical metering pumps
  • Connection to PLCs
  • Water and wastewater monitoring

Specifications

• Type: With Mounted DL76
• Material: Brass, PVC or 316 SS with PVDF (Kynar®) rotor
• Usage: for 3"-40" pipes (up to 64" optional)
• Tamper Evidence: Tamper-evident kit option available
• Rotor Shaft: Tungsten carbide rotor shaft (ceramic or silicon carbide optional)
• Series: IP100/200 Series
• Includes: Data-Logger module
• Not Included: The sensors need to be mated with a fitting such as the Seametrics saddle fitting, to match whatever your application requires. Connection to a laptop requires a DC3 cable.
• Features:
  • Hot tap: Insert or remove without depressurizing pipe
  • High quality ruby bearings and carbide or ceramic rotor shaft ensure long life and excellent low-flow performance
  • Only one moving part that's easily replaced
  • Paddlewheel machined from solid rod for maximum low-flow performance
  • No magnetic drag on the paddlewheel rotor as it uses a Hall-effect sensor
  • Adjustable depth insertion design allows the unit to be installed in a variety of pipes of different sizes
  • PVDF rotor
  • Choice of materials for compatibility with variety of chemicals
• Applications:
  • Clean water
  • Aquariums, water parks
  • Control of chemical metering pumps
  • Connection to PLCs
  • Water and wastewater monitoring

Specifications

• Type: With Mounted FT450
• Material: Brass, PVC or 316 SS with PVDF (Kynar®) rotor
• Usage: for 3"-40" pipes (up to 64" optional)
• Power Supply: Battery powered
• Output: 2 pulse outputs
• Total: Resettable and non-resettable versions
• Tamper Evidence: Tamper-evident kit option available
• Cover: Optional hinged display cover
• Rotor Shaft: Tungsten carbide rotor shaft (ceramic or silicon carbide optional)
• Series: IP100/200 Series
• Includes: Rate and total indicator
• Not Included: The sensors need to be mated with a fitting such as the Seametrics saddle fitting, to match whatever your application requires.
• Features:
  • Hot tap: Insert or remove without depressurizing pipe
  • High quality ruby bearings and carbide or ceramic rotor shaft ensure long life and excellent low-flow performance
  • Only one moving part that's easily replaced
  • Paddlewheel machined from solid rod for maximum low-flow performance
  • No magnetic drag on the paddlewheel rotor as it uses a Hall-effect sensor
  • Adjustable depth insertion design allows the unit to be installed in a variety of pipes of different sizes
  • PVDF rotor
  • Choice of materials for compatibility with variety of chemicals
• Applications:
  • Clean water
  • Aquariums, water parks
  • Control of chemical metering pumps
  • Connection to PLCs
  • Water and wastewater monitoring

Specifications

• Type: With Mounted FT440
• Material: Brass, PVC or 316 SS with PVDF (Kynar®) rotor
• Usage: for 3"-40" pipes (up to 64" optional)
• Power Supply: Loop powered
• Output: 2 pulse outputs and 1 analog 4-20 mA output
• Total: Resettable and non-resettable versions
• Tamper Evidence: Tamper-evident kit option available
• Cover: Optional hinged display cover
• Rotor Shaft: Tungsten carbide rotor shaft (ceramic or silicon carbide optional)
• Series: IP100/200 Series
• Regulatory: CE
• Includes: Rate and total indicator
• Not Included: The sensors need to be mated with a fitting such as the Seametrics saddle fitting, to match whatever your application requires.
• Features:
  • Hot tap: Insert or remove without depressurizing pipe
  • High quality ruby bearings and carbide or ceramic rotor shaft ensure long life and excellent low-flow performance
  • Only one moving part that's easily replaced
  • Paddlewheel machined from solid rod for maximum low-flow performance
  • No magnetic drag on the paddlewheel rotor as it uses a Hall-effect sensor
  • Adjustable depth insertion design allows the unit to be installed in a variety of pipes of different sizes
  • PVDF rotor
  • Choice of materials for compatibility with variety of chemicals
• Applications:
  • Clean water
  • Aquariums, water parks
  • Control of chemical metering pumps
  • Connection to PLCs
  • Water and wastewater monitoring

Specifications

• Type: Sensor Only
• Material: Brass, PVC or 316 SS with Hastelloy electrode and PVDF electrode cap
• Usage: for 1"-12" pipes
• Power: Low power option available
• O-Ring: EPDM or Viton® O-ring
• Flow: Reverse flow output available
• Series: EX800 Series
• Environmental: Immersible option available
• Regulatory: CE (standard power only)
• Not Included: The sensors need to be mated with a special tee, saddle or weld fitting, to match whatever your application requires.
• Features:
  • No moving parts
  • Economical
  • Durable
  • Easy to install
  • Easy to maintain
• Applications:
  • Conductive fluids
  • Industrial processes
  • For control of chemical metering pumps
  • Fertigation

Specifications

• Type: With Mounted FT430
• Material: Brass, PVC or 316 SS with Hastelloy electrode and PVDF electrode cap
• Usage: for 1"-12" pipes
• Power: Low power option available
• Power Supply: Externally powered
• Output: 2 pulse outputs
• Total: Resettable and non-resettable versions
• Tamper Evidence: Tamper-evident kit option available
• Cover: Optional hinged display cover
• O-Ring: EPDM or Viton® O-ring
• Flow: Reverse flow output available
• Series: EX800 Series
• Regulatory: CE (standard power only)
• Includes: Rate and total indicator
• Not Included: The sensors need to be mated with a special tee, saddle or weld fitting, to match whatever your application requires.
• Features:
  • No moving parts
  • Economical
  • Durable
  • Easy to install
  • Easy to maintain
• Applications:
  • Conductive fluids
  • Industrial processes
  • For control of chemical metering pumps
  • Fertigation

Specifications

• Type: With Mounted DL76
• Material: Brass, PVC or 316 SS with Hastelloy electrode and PVDF electrode cap
• Usage: for 1"-12" pipes
• Power: Low power option available
• Tamper Evidence: Tamper-evident kit option available
• O-Ring: EPDM or Viton® O-ring
• Flow: Reverse flow output available
• Series: EX800 Series
• Includes: Data-Logger module
• Not Included: The sensors need to be mated with a special tee, saddle or weld fitting, to match whatever your application requires. Connection to a laptop requires a DC3 cable.
• Features:
  • No moving parts
  • Economical
  • Durable
  • Easy to install
  • Easy to maintain
• Applications:
  • Conductive fluids
  • Industrial processes
  • For control of chemical metering pumps
  • Fertigation

Specifications

• Type: With Mounted FT440
• Material: Brass, PVC or 316 SS with Hastelloy electrode and PVDF electrode cap
• Usage: for 1"-12" pipes
• Power: Low power option available
• Power Supply: Loop powered
• Output: 2 pulse outputs and 1 analog 4-20 mA output
• Total: Resettable and non-resettable versions
• Tamper Evidence: Tamper-evident kit option available
• Cover: Optional hinged display cover
• O-Ring: EPDM or Viton® O-ring
• Flow: Reverse flow output available
• Series: EX800 Series
• Regulatory: CE (standard power only)
• Includes: Rate and total indicator
• Not Included: The sensors need to be mated with a special tee, saddle or weld fitting, to match whatever your application requires.
• Features:
  • No moving parts
  • Economical
  • Durable
  • Easy to install
  • Easy to maintain
• Applications:
  • Conductive fluids
  • Industrial processes
  • For control of chemical metering pumps
  • Fertigation

Specifications

• Type: Sensor Only
• Material: Brass or 316 SS with Hastelloy electrode and PVDF electrode cap
• Usage: for 3"-48" pipes (up to 72" optional)
• Power: Low power option available
• Adapter Fitting: 1½" or 2" NPT adapter fitting
• Flow: Reverse flow output available
• Series: EX100/200 Series
• Environmental: Immersible option available
• Regulatory: CE (standard power only)
• Not Included: The sensors need to be mated with a fitting such as the Seametrics saddle fitting, to match whatever your application requires.
• Features:
  • Adjustable depth insertion design allows the unit to be installed in a variety of pipes of different sizes
  • Electromagnetic, so there's no moving parts
  • No moving parts means that it's easy to maintain and can handle "difficult" fluids
  • Durable
• Applications:
  • Conductive fluids
  • Clean or "dirty" liquids
  • Industrial processes
  • Control of chemical metering pumps
  • Connection to PLCs
  • Municipal
  • Irrigation

Specifications

• Type: With Mounted FT430
• Material: Brass or 316 SS with Hastelloy electrode and PVDF electrode cap
• Usage: for 3"-48" pipes (up to 72" optional)
• Power: Low power option available
• Power Supply: Externally powered
• Output: 2 pulse outputs
• Total: Resettable and non-resettable versions
• Tamper Evidence: Tamper-evident kit option available
• Cover: Optional hinged display cover
• Adapter Fitting: 1½" or 2" NPT adapter fitting
• Flow: Reverse flow output available
• Series: EX100/200 Series
• Regulatory: CE (standard power only)
• Includes: Rate and total indicator
• Not Included: The sensors need to be mated with a fitting such as the Seametrics saddle fitting, to match whatever your application requires.
• Features:
  • Adjustable depth insertion design allows the unit to be installed in a variety of pipes of different sizes
  • Electromagnetic, so there's no moving parts
  • No moving parts means that it's easy to maintain and can handle "difficult" fluids
  • Durable
• Applications:
  • Conductive fluids
  • Clean or "dirty" liquids
  • Industrial processes
  • Control of chemical metering pumps
  • Connection to PLCs
  • Municipal
  • Irrigation

Specifications

• Type: With Mounted DL76
• Material: Brass or 316 SS with Hastelloy electrode and PVDF electrode cap
• Usage: for 3"-48" pipes (up to 72" optional)
• Power: Low power option available
• Tamper Evidence: Tamper-evident kit option available
• Adapter Fitting: 1½" or 2" NPT adapter fitting
• Flow: Reverse flow output available
• Series: EX100/200 Series
• Includes: Data-Logger module
• Not Included: The sensors need to be mated with a fitting such as the Seametrics saddle fitting, to match whatever your application requires. Connection to a laptop requires a DC3 cable.
• Features:
  • Adjustable depth insertion design allows the unit to be installed in a variety of pipes of different sizes
  • Electromagnetic, so there's no moving parts
  • No moving parts means that it's easy to maintain and can handle "difficult" fluids
  • Durable
• Applications:
  • Conductive fluids
  • Clean or "dirty" liquids
  • Industrial processes
  • Control of chemical metering pumps
  • Connection to PLCs
  • Municipal
  • Irrigation

Specifications

• Type: with Mounted FT440
• Material: Brass or 316 SS with Hastelloy electrode and PVDF electrode cap
• Usage: for 3"-48" pipes (up to 72" optional)
• Power: Low power option available
• Power Supply: Loop powered
• Output: 2 pulse outputs and 1 analog 4-20 mA output
• Total: Resettable and non-resettable versions
• Tamper Evidence: Tamper-evident kit option available
• Cover: Optional hinged display cover
• Adapter Fitting: 1½" or 2" NPT adapter fitting
• Flow: Reverse flow output available
• Series: EX100/200 Series
• Regulatory: CE (standard power only)
• Includes: Rate and total indicator
• Not Included: The sensors need to be mated with a fitting such as the Seametrics saddle fitting, to match whatever your application requires.
• Features:
  • Adjustable depth insertion design allows the unit to be installed in a variety of pipes of different sizes
  • Electromagnetic, so there's no moving parts
  • No moving parts means that it's easy to maintain and can handle "difficult" fluids
  • Durable
• Applications:
  • Conductive fluids
  • Clean or "dirty" liquids
  • Industrial processes
  • Control of chemical metering pumps
  • Connection to PLCs
  • Municipal
  • Irrigation

Specifications

• Type: Sensor Only
• Material: Brass or 316 SS with Hastelloy electrode and PVDF electrode cap
• Usage: for 3"-48" pipes (up to 72" optional)
• Power: Low power option available
• Flow: Reverse flow output available
• Series: EX100/200 Series
• Environmental: Immersible option available
• Regulatory: CE (standard power only)
• Not Included: The sensors need to be mated with a fitting such as the Seametrics saddle fitting, to match whatever your application requires.
• Features:
  • Adjustable depth insertion design allows the unit to be installed in a variety of pipes of different sizes
  • Hot tap: Insert or remove without depressurizing pipe
  • Electromagnetic, so there's no moving parts
  • No moving parts means that it's easy to maintain and can handle "difficult" fluids
  • Durable
• Applications:
  • Conductive fluids
  • Clean or "dirty" liquids
  • Industrial processes
  • Control of chemical metering pumps
  • Connection to PLCs
  • Municipal
  • Irrigation

Specifications

• Type: With Mounted FT430
• Material: Brass or 316 SS with Hastelloy electrode and PVDF electrode cap
• Usage: for 3"-48" pipes (up to 72" optional)
• Power: Low power option available
• Power Supply: Externally powered
• Output: 2 pulse outputs
• Total: Resettable and non-resettable versions
• Tamper Evidence: Tamper-evident kit option available
• Cover: Optional hinged display cover
• Flow: Reverse flow output available
• Series: EX100/200 Series
• Regulatory: CE (standard power only)
• Includes: Rate and total indicator
• Not Included: The sensors need to be mated with a fitting such as the Seametrics saddle fitting, to match whatever your application requires.
• Features:
  • Adjustable depth insertion design allows the unit to be installed in a variety of pipes of different sizes
  • Hot tap: Insert or remove without depressurizing pipe
  • Electromagnetic, so there's no moving parts
  • No moving parts means that it's easy to maintain and can handle "difficult" fluids
  • Durable
• Applications:
  • Conductive fluids
  • Clean or "dirty" liquids
  • Industrial processes
  • Control of chemical metering pumps
  • Connection to PLCs
  • Municipal
  • Irrigation

Specifications

• Type: With Mounted DL76
• Material: Brass or 316 SS with Hastelloy electrode and PVDF electrode cap
• Usage: for 3"-48" pipes (up to 72" optional)
• Power: Low power option available
• Tamper Evidence: Tamper-evident kit option available
• Flow: Reverse flow output available
• Series: EX100/200 Series
• Includes: Data-Logger module
• Not Included: The sensors need to be mated with a fitting such as the Seametrics saddle fitting, to match whatever your application requires. Connection to a laptop requires a DC3 cable.
• Features:
  • Adjustable depth insertion design allows the unit to be installed in a variety of pipes of different sizes
  • Hot tap: Insert or remove without depressurizing pipe
  • Electromagnetic, so there's no moving parts
  • No moving parts means that it's easy to maintain and can handle "difficult" fluids
  • Durable
• Applications:
  • Conductive fluids
  • Clean or "dirty" liquids
  • Industrial processes
  • Control of chemical metering pumps
  • Connection to PLCs
  • Municipal
  • Irrigation

Specifications

• Type: With Mounted FT440
• Material: Brass or 316 SS with Hastelloy electrode and PVDF electrode cap
• Usage: for 3"-48" pipes (up to 72" optional)
• Power: Low power option available
• Power Supply: Loop powered
• Output: 2 pulse outputs and 1 analog 4-20 mA output
• Total: Resettable and non-resettable versions
• Tamper Evidence: Tamper-evident kit option available
• Cover: Optional hinged display cover
• Flow: Reverse flow output available
• Series: EX100/200 Series
• Regulatory: CE (standard power only)
• Includes: Rate and total indicator
• Not Included: The sensors need to be mated with a fitting such as the Seametrics saddle fitting, to match whatever your application requires.
• Features:
  • Adjustable depth insertion design allows the unit to be installed in a variety of pipes of different sizes
  • Hot tap: Insert or remove without depressurizing pipe
  • Electromagnetic, so there's no moving parts
  • No moving parts means that it's easy to maintain and can handle "difficult" fluids
  • Durable
• Applications:
  • Conductive fluids
  • Clean or "dirty" liquids
  • Industrial processes
  • Control of chemical metering pumps
  • Connection to PLCs
  • Municipal
  • Irrigation

Specifications

• Range: 0.04 to 3 fps (US), 0.012 to 0.91 mps (metric)
• Mounting: 3/4"
• Includes: Compact Flow Controller
• Classification: General purpose
• Pressure: 150 psi / 10 bar @ 25° C
• Material: PP/PVDF
• Enclosure Type: NEMA 4X (IP65)
• Supply Voltage: 120 / 240 VAC
• Relay Output: 1 SPDT relay
• Features: Sensor, power & relay LEDs
• Weight: 3 lbs
• For Use With: Relatively clean non-coating media
• Primary Application: Relatively constant temperature

Specifications

• Range: 0.04 to 3 fps (0.012 to 0.91 mps)
• Mounting: 3/4"
• Includes: Compact Junction Box
• Classification: General purpose
• Pressure: 150 psi / 10 bar @ 25° C
• Material: PP/PVDF
• Enclosure Type: NEMA 4X (IP65)
• Supply Voltage: 14-36 VDC
• Relay Output: 1 SPST relay
• Features: Flow status LEDs
• Weight: 3 lbs
• For Use With: Relatively clean non-coating media
• Primary Application: Relatively constant temperature

Specifications

• Range: 0.04 to 3 fps (US), 0.012 to 0.91 mps (metric)
• Mounting: 3/4"
• Classification: General purpose
• Pressure: 150 psi / 10 bar
• Material: PP/PVDF
• Enclosure Type: NEMA 4X (IP65)
• Supply Voltage: 14-36 VDC
• Relay Output: 1 SPST relay
• Features: Flow status LED
• Weight: 3 lbs
• For Use With: Relatively clean non-coating media
• Primary Application: Relatively constant temperature

Specifications

• Mounting: 3/4"
• Classification: General purpose
• Enclosure Type: NEMA 4X (IP65)
• Supply Voltage: 120 / 240 VAC
• Input: (1) four-wire flow switch
• Relay Output: 1 SPDT relay
• Features: Sensor, power & relay LEDs
• Weight: 3 lbs
• For Use With: Liquid or gas
• Primary Application: Low-flow pump or process protection

Blue-White's FVS Series flow meters are used for low flow applications. These meters will work with chemical metering pumps and will work with pulsating flows that are notoriously difficult to measure. The working range of flows that can be measured is from 30 mL/min to 7000 mL/min depending on the model chosen. There are options to provide for compatibility with a variety of chemicals using PVDF, PVC, or polypropylene plastics with FKM (Viton) or EPDM o-rings. Rate and total displays are also optional and are surprisingly inexpensive.

Specifications

• Flowrate: Max from 22 GPM to 100 GPM
• Pressure: 15-100 psi
• Material: Engineered reinforced nylon with engineered thermoplastic internals and alnico magnet
• Size: 3/4", 1" or 1.5"
• Signal: Reed switch output

Specifications

• Pressure: 100 psi
• Material: PVC/PE/PTFE/FKM
• Size: 1/4" or 3/8"
• Weight: 0.1 lbs
• Includes: Bracket

Specifications

• Electrical: 120 VAC 60 Hz
• Turndown Ratio: 10:1
• Signal: Dry contact pulse input
• Weight: 2 lbs