Seametrics Fixed Depth Insertion Paddlewheel Meter IP810B (IP810B)

Your Price :

$645.00

Request for Quote

Specifications

Type: Sensor Only
Material: Brass with PVDF (Kynar®) rotor
Usage: for 1/2″-3″ pipes
Power: Standard power pickup
Connector: 18’ cable without connector
O-Ring: EPDM O-ring
Rotor Shaft: Nickel-bonded tungsten carbide rotor shaft
Series: IP800 Series
Environmental: Not immersible
Regulatory: CE
Not Included: The sensors need to be mated with a special tee, saddle or weld fitting, to match whatever your application requires.
Weight: 2.5 lbs
Features:
- High quality ruby bearings and carbide or ceramic rotor shaft ensure long life and excellent low-flow performance
- Only one moving part that's easily replaced
- Paddlewheel machined from solid rod for maximum low-flow performance
- No magnetic drag on the paddlewheel rotor as it uses a Hall-effect sensor
- Insertion design is economical and easy to install
- Choice of materials for compatibility with variety of chemicals
Applications:
- Water treatment
- Industrial wastewater treatment
- Cooling water monitoring
- Industrial fluid control
- Chemical proportioning

Other Fixed Depth Insertion Paddlewheel Meters are on our Seametrics Fixed Depth Insertion Paddlewheel Meter IP810/IP820 page.

Top Models
Product Details
Downloads
Videos
FAQ

General Description

The IP800-Series are impeller (or "paddlewheel") insertion meters designed for use with a wide variety of liquids. Bodies are machined from a solid rod for maximum precision. High-quality jewel bearings and nickel-bound tungsten carbide shafts are used for extremely low friction and long life.

Output is a current-sinking pulse, which can be sent long distances (up to 2,000 feet) without a transmitter. This signal can be connected directly to PLCs, counters, and computer cards, as well as a variety of Seametrics and Walchem controls and displays.

The IP800 series meters come in 2 different size ranges, indicated by the 4th character of the model number:

IP81 for 1/2″-3″ pipe
IP82 for 4″-8″ pipe

The next digit of the model number indicates what (if any) electronic module is mounted on the unit:

IP8x0: Sensor only, with current-sinking pulse output for wiring to external device, e.g., wall- or panel-mounted electronic module
IP8x3: With FT430 Flowmeter Transmitter display module, with pulse output
IP8x7: With FT450 Flowmeter Transmitter display module, battery-powered
IP8x9: With FT440 Flowmeter Transmitter display module, with pulse and analog output

The following character indicates what material the sensor body is made from:

IP8xxB: Brass
IP8xxP: PVC
IP8xxS: 316 Stainless Steel
IP8xxY: Polypropylene

The stainless steel version is available in a high-pressure (up to 400 PSI) version: IP8xxS-HP

Other options available:

Ceramic Rotor Shaft ("-01"): Substitute the standard tungsten carbide rotor shaft with a zirconia ceramic rotor shaft.
Silicon Carbide Rotor Shaft ("-68"): Substitute the standard tungsten carbide rotor shaft with a silicon carbide rotor shaft.
Micropower Pickup ("-04"): You can specify a lower power pickup (for an external battery-powered FT450).
Connector Type ("-06", "-07" or "-106"): If you are connecting directly to an LMI metering pump, you can specify either the 4-pin or 5-pin connector. Also, you can specify a Seametrics connector (for an external PD10).
Immersible Option ("-40"): This provides protection for the sensor in case the installation location is submerged. Immersible to maximum of 3 ft (1m), up to 2 weeks.
Viton O-Ring ("-60"): The sensor has an O-ring to seal itself in the fitting. Normally, this is made from EPDM, but if you need better chemical resistance, then use the Viton O-ring.